$ee the difference!  Feel the difference!  
$ave the difference!

3 days after the addition was built. 

ACSI-SIPS Structural Insulated Panels are made with a solid foam core bonded to substrates of OSB and structural Type X Fiberbond^SM "sheetrock".

Foams that compose the core of ACS‑SIPS provide structural integrity.  The closed cell properties prevent harmful moisture absorption, air leakage, and mold and mildew. 

 ACS‑SIPS provide R‑30+ wall panels and R‑46+ roof panels depending on the density of the SPS and depth of the patented polymer.  A conventional 2x4 house has only an R-12 to R-17 wall and R‑30 roof non-sealed insulation.

The use of ACS‑SIPS saves the homeowner money by reducing energy consumption by at least 50% over conventional methods.

100% of all wall and roof joints are sealed with the patented ENERFOAM or equivalent thermal and insulating adhesives which have a 5.7 R‑value. The patented polymer averages 1‑2” penetration into various substrates which causes the wall and roof systems to maintain 100% of their initial R-value. This water-activated polymer impregnates all substrates and produces a monolithic wall which eliminates any air or moisture exchanges.  

Patented polymer adhesive and insulating foam eliminates air or wind that moves through seams and cracks in a conventional wind cavity (windwashing) or air infiltration through the wall itself. A conventional wall without the patented polymer or the more costly conventional housewrap process can have the R‑value reduced by as much as 63% on a typical day.

Usage of ACS‑SIPS allow you to use a smaller H‑VAC (heating, ventilating, and air-conditioning) systems that reduce construction "first" cost.

Significantly less air leakage, moisture intrusion, and a tighter building envelope makes the home more durable.

Pre-routed electrical chases increases the perimeter wall R‑values by at least 6% increasing energy efficiency characteristics.